Pressure gauge fitting, G 1/4 i., Pipe exterior Ø 8 mm - Riegler 111981
-
This Item:
€2.96
-
Amplification sleeve, Pipe exterior Ø 6/4 mm, Bright brass - Riegler 112021
€0.44
-
Amplification sleeve, Pipe exterior Ø 15/12, Bright brass - Riegler 112026
€0.82
Pressure gauge fitting, G 1/4 i., Pipe exterior Ø 8 mm, Operating pressure max. 60 bar, Temp. max 150 °C, nickel-plated brass
Technical data
| Max. operating pressure | 60 bar |
|---|---|
| Max. temperature range | 150 °C |
| Material | nickel-plated brass |
| Thread | G 1/4 IT |
| Tube O.D. | 8 mm |
| L1 | 31.0 mm |
| a/f | 17 mm |
| a/f 1 | 14 mm |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: IT
About Pressure gauge fittings
Pressure gauge fittings connect an instrument to the pipework through a cutting ring joint. The group offers female threads from G 1/8 to G 1/2 on the gauge side and tube O.D. 4 to 18 mm on the line side. The fitting takes up the connection and holds it tight, so no sealing work is needed at the gauge itself.
What matters when choosing
- Thread: G 1/8, G 1/4, G 3/8 or G 1/2 female. What counts is the connection stub of the gauge in use, not the pipe size.
- Tube O.D.: 4 to 18 mm. The cutting ring bites onto the outer diameter, so that dimension has to be exact and pipe tolerances should be checked beforehand.
- Material: zinc-plated steel to DIN 2353, nickel-plated brass, or stainless steel 1.4571. Media, pipe material and corrosion load decide, and pipe and fitting should share the same material family.
- Pressure rating: part of the range is specified at max. operating pressure 60 bar, the remaining versions at PN 100 to 630 bar. Design against the value of the individual article.
- Installed size: across-flats dimensions differ with each thread and tube diameter combination, so check wrench access in tight installations.
Typical applications
- Connecting pressure gauges to high pressure hydraulic lines.
- Measuring points in compressed air and oil circuits in machine building.
- Test connections on pumps and power units where a gauge is fitted only temporarily.
- Installations built in stainless tube, where the 1.4571 version avoids a material mismatch.
- Retrofitting or relocating a measuring point during a plant overhaul.
The steel versions are zinc-plated and made to DIN 2353, with nickel-plated brass and stainless steel 1.4571 as alternatives. The 33 articles of this group come from Italy and Germany.
| Weight | 0.027000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | N 64 |
| EAN | 4047322162678 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Italy |
| Material | Nickel-plated brass |
| Thread | G 1/4 IG |
| Tube OD [mm] | 8 |
| Norm | DIN 2353 |
| Betriebsdruck max [bar] | 60.000000 |
| Pneumatic connection | G1/4 IG |




