Hydac pipe clamps, heavy series
Hoses, tubes and clamps
Pipe clamps of the heavy series to DIN 3015-2 for tube outside diameters of 6 to 66 mm, 151 versions. Against the light series the heavy body is taller and takes higher line loads.
The range covers plastic clamps with weld plate, with extended weld plate plus cover plate, with cover plate and rail nuts for C rail assembly, and aluminium clamps with weld and cover plate. Clamp sizes run from 1 to 5.
DIN 3015-2 - heavy series, 151 versions held in this category
Tube 6 to 66 mm - including 13.7, 17.1, 21.3, 26.9, 33.7, 48.3, 60.3, 65 and 66 mm
Clamp sizes 1 to 5 - graded by tube diameter, size 5 taking 66 mm tube
Materials - plastic clamp body or aluminium, both with steel mounting parts
Assembly - weld plate, long weld plate, cover plate or C rail
The heavy series is routed on hydraulic power units, presses and construction plant where pressure surges set pipework moving.
Cover plate and weld plate build a positive tie into the machine frame. Matching clamp jaw pairs of the same standard allow the clamp body to be replaced without removing the base plate.
