Hydac clamp jaw pairs, light series
Hoses, tubes and clamps
Clamp jaw pairs of the light series to DIN 3015-1, 63 versions for tube outside diameters of 6 to 54 mm. A pair consists of two halves that enclose the tube inside the clamp.
The clamp body is polypropylene or aluminium. Sizes run from 0 to 6 and match the base plates of the pipe clamps in the same standard.
DIN 3015-1 - light series, 63 clamp jaw pairs
Tube 6 to 54 mm - including 13.7, 17.1, 21.3, 23, 26.9, 33.7, 48.3 and 50.8 mm
Sizes 0 to 6 - size 6 covers tube around 44.5 and 48.3 mm
Materials - polypropylene or aluminium
Clamp jaw pairs serve as spare or conversion parts when the tube diameter changes on an existing clamp rail.
The base plate with its weld or rail mounting stays in place, only the clamp body is exchanged. The aluminium version is chosen at higher temperature or with oil bearing media.
