Adjustable elbow stud fittings, G thread
Tube fittings
Adjustable elbow stud fittings with G thread turn a pipe run through 90 degrees right at the port. The body is screwed in, rotated into the required direction, then locked in place, so the outlet can be aimed regardless of how deep the thread runs. The range covers 68 items.
The stud side spans eight thread sizes from G 1/8" up to G 1-1/2". On the elbow leg 20 pipe sizes are available: the light series from 6 to 42 mm outside diameter, the heavy series from 6 to 38 mm, nut threads from M12x1.5 to M52x2. Bodies come in zinc plated steel or stainless steel 1.4571.
The elbows are fitted to valve blocks, pump ports and cylinder end caps where the line has to leave the port sideways. Since the outlet turns freely before locking, several ports on one block can be routed the same way. Large threads from G 1" upward feed main lines, small sizes from G 1/8" serve control outlets as well as gauge outlets.
