PTFE and PFA tubing
Hoses, tubes and clamps
Tubing in PTFE and PFA, 76 versions, sizes from 3 x 2 up to 14 x 12 mm outside by inside diameter. Working pressure rises as the section falls: 12 bar at 12 x 10 mm, 18 bar at 8 x 6 mm, 25 bar at 6 x 4 mm and 42 bar at 4 x 2 mm.
Supply is by the metre from the 50 m coil or as a 100 m coil, in natural, black, blue, yellow, red and green. Minimum bend radius runs from 15 to 110 mm.
Working pressure 12 to 42 bar - set by size, 42 bar on 4 x 2 mm
Sizes 3 x 2 to 14 x 12 mm - plus 4 x 2, 4 x 3, 6 x 4, 8 x 6, 10 x 8 and 12 x 10 mm
Minimum bend radius 15 to 110 mm - steps of 15, 20, 30, 40, 60, 90 and 110 mm
Six colours - natural, black, blue, yellow, red and green
Supply form - cut length from the 50 m coil or a closed 100 m coil
PTFE and PFA tubing carries aggressive media in chemical plant, analytical equipment and dosing systems.
The smooth bore resists deposits and can be flushed clean; PFA is chosen where a transparent, weldable tube is needed. Assembly is by compression ring fittings or support sleeves.
