Polyurethane tubing, calibrated bore
Hoses, tubes and clamps
Polyurethane tubing with a calibrated bore in 81 versions, sizes from 4 x 2 up to 12 x 9 mm. The calibrated inside diameter keeps tolerance tight at the sealing point of a push-in fitting.
Supply is by the metre from the 50 m coil or as a 100 m coil, in blue, natural, black, green, red and yellow. Minimum bend radius lies between 15 and 45 mm depending on size.
Sizes 4 x 2 to 12 x 9 mm - plus 4.3 x 3, 5 x 3, 6 x 4, 8 x 6, 10 x 8 and 11.6 x 9 mm
Minimum bend radius 15 to 45 mm - steps of 15, 20, 25, 35 and 45 mm
Calibrated bore - tight tolerance on the inside diameter for push-in fittings
Six colours - blue, natural, black, green, red and yellow
Supply form - cut length from the 50 m coil or a closed 100 m coil
The tubing links valve terminals, cylinders and grippers in handling equipment as well as special purpose machinery.
A bend radius down to 15 mm allows tight harnesses on moving axes. Against PE tubing, PU is more elastic and copes better with motion inside an energy chain.
