Did you know?

Galvanised steel pipe rusts from inside once condensate stands. The zinc flakes that come loose travel into valves and nozzles, where they do far more harm than in the pipe.

Browse filtration

Hoses, tubes and clamps

Stainless steel crimp fittings, 4 SH hose

Stainless steel crimp fittings for 4 SH hose with internal skiving and pull-out protection, nominal sizes DN 19 to DN 38, 81 versions.

Port ends include 24 degree cone seat with union nut (DKO, DKR), JIC 74 degree seat (DKJ), BSP male thread (AGR), NPTF male taper thread (AGN) and SAE 6000 PSI flanges in light and heavy series, each straight, 45 and 90 degree.

81 items
1 manufacturer
Net prices plus VAT

View as Grid view List view

Show

per page

Buying guide

How to choose Stainless steel crimp fittings, 4 SH hose

What matters when choosing: properties, comparison and typical applications.

Technical features

⚡DN 19 to DN 38 - nominal sizes for 4 SH hose across 81 stainless versions

📏19 body shapes - AGN, AGR, DKJ, DKO, DKR, SFL, SFS and CES, straight plus 45 and 90 degree

⚙Metric ports - M 36x2 (25 S), M 42x2 (30 S) and M 52x2 (38 S)

🔧Inch ports - G 3/4 in to G 1-1/2 in as well as UN 1-1/16 in-12 to UN 1-7/8 in-12

🌡SAE flanges - 38.1 to 63.5 mm connection size, 6000 PSI series

Applications

The stainless build is routed where high pressure lines also face corrosion: offshore equipment, chemical plant and washdown lines.

Processing and crimp dimensions follow the steel range, so the same die sets apply. The pull-out lock keeps the ferrule on the shank under cycling load.