Hydac stainless steel clamps, light series
Hoses, tubes and clamps
Stainless steel pipe clamps of the light series to DIN 3015-1 for tube outside diameters of 6 to 54 mm, 108 versions. A plastic clamp body combined with stainless hardware holds lines in wet surroundings.
Mounting is offered as weld plate, extended weld plate, weld plate with cover plate, or with rail nuts for a C rail. Clamp sizes run from 2 to 5.
DIN 3015-1 in stainless - light series, 108 versions held in this category
Tube 6 to 54 mm - steps including 13.7, 17.1, 21.3, 26.9, 44.5 and 50.8 mm
Clamp sizes 2 to 5 - size 5 covers tube around 35 to 42 mm
Mounting - weld plate, extended plate, cover plate or C rail
These clamps are routed on smaller process lines, on instrument tubing and in plant that is cleaned on a regular cycle.
The light series is adequate as long as pressure surges stay moderate; under higher load the heavy series to DIN 3015-2 takes over.
