Filtration and Loop Cleaning
Strainers and Screens
Strainers hold back coarse particles before they reach the narrow channels of cold plates and the seats of control valves. The screen sits in the angled branch of the body, collects assembly swarf, seal abrasion and corrosion products, and can be withdrawn for cleaning without dismantling the pipe run. The 252 items cover connection sizes G 1/4 to G 1 1/4, corresponding to DN 8 through DN 32, with mesh sizes from 0.05 to 1.0 mm. Brands are Riegler, Fluidics equipment and Resideo Braukmann.
Mesh size follows the task: 0.5 mm and coarser to protect the pump during commissioning, 0.2 to 0.3 mm in continuous operation, 0.05 mm upstream of sensitive control valves. Bodies are available in plain brass, nickel-plated brass and gunmetal, replacement screens in 1.4408 stainless steel for -20 to +200 °C. Copper alloys stay uncritical in a water-glycol loop only with a single-metal pairing; where stainless steel and plastics dominate, the strainer should follow suit.
- 192 items
- 3 manufacturers
- Net prices plus VAT
Buying guide
How to choose Strainers and Screens
What matters when choosing: properties, comparison and typical applications.
Technical data - strainers and screens
Choosing the mesh size
Mesh size, task and material in the water-glycol loop
| Mesh size | Task in the loop | Typical connection size | Body material |
|---|---|---|---|
| 0.05 mm | protection of control valves and sensors | G 1, DN 25 | nickel-plated brass |
| 0.2 mm | fine screen in continuous duty | G 1 1/4, DN 32 | plain brass |
| 0.25 mm | standard in the secondary loop | G 1/4 to G 1/2, DN 8 to DN 15 | gunmetal |
| 0.3 mm | supply line ahead of rack manifolds | G 1, DN 25 | nickel-plated brass |
| 0.5 mm | pump and plant protection | G 1/4 to G 1 1/4 | plain brass, gunmetal |
| 0.6 to 1.0 mm | flushing during commissioning | replacement screen and spare set | stainless steel 1.4408 |
Typical applications
- Supply line into the secondary loop, protecting pump and heat exchanger
- Header upstream of rack manifolds and distribution units
- Flushing circuit when commissioning new cold plate runs
- Connecting lines of dry coolers and free cooling units
- Retrofit in existing plants without a filter station
- Test and filling stations for water-glycol mixtures