Safety valve, TÜV type-tested, factory-set, G 3/8", DN 8, 8.00 bar, stainless steel 1.4571

The valve responds at 8.00 bar and protects vessels and pipework against inadmissible overpressure. Its discharge capacity is 213 m³/h at nominal size DN 8. It is fitted through the G 3/8" thread and the body is made of stainless steel 1.4571.

Benefits

• Connection thread G 3/8" with 22 mm across flats.
• Overall height H 63 mm, dimension h 12 mm.
• Set pressure 8.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 213 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 3/8" and with a setting certificate on request.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 8.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 8 bar. It is supplied exclusively with a fixed setting and a lead seal.