Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 5.00 bar, stainless steel 1.4401

The valve responds at 5.00 bar and protects vessels and pipework against inadmissible overpressure. Its discharge capacity is 141 m³/h at nominal size DN 8. It is fitted through the G 1/2" thread and the body is made of stainless steel 1.4401.

Benefits

• Body of stainless steel 1.4401 with an FKM seal for -25 to +180 °C.
• Set pressure 5.00 bar, fixed and lead-sealed at the factory.
• Overall height H 63 mm, dimension h 14 mm.
• Discharge capacity 141 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 5.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 5 bar. It is supplied exclusively with a fixed setting and a lead seal.