Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/4", DN 8, 10.60 bar, brass

With its G 1/4" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 10.60 bar. When it responds, up to 275 m³/h escape freely. Body of brass, seal of FKM, nominal size DN 8.

Benefits

• Discharge capacity 275 m³/h at nominal size DN 8.
• Connection thread G 1/4" with 17 mm across flats.
• Set pressure 10.60 bar, fixed and lead-sealed at the factory.
• Free blow-off of up to 275 m³/h for compressed air and other non-toxic, non-flammable gases.
• Body of brass with an FKM seal for -25 to +180 °C.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 10.60 bar. The material brass also determines which medium and which surroundings are suitable.

Standards and conformity

As a type-tested component the valve carries the marking TÜV-SV...-2055.7,5.D/G.0,75 CE0036 10,6 bar and leaves the factory lead-sealed. Later adjustment of the 10.60 bar set pressure is therefore ruled out.