Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 42.00 bar, brass

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 42.00 bar. When it responds, up to 1026 m³/h escape freely. Body of brass, seal of FKM, nominal size DN 8.

Benefits

• Set pressure 42.00 bar, fixed and lead-sealed at the factory.
• Connection thread G 1/2" with 24 mm across flats.
• Free blow-off of up to 1026 m³/h for compressed air and other non-toxic, non-flammable gases.
• Overall height H 82 mm, dimension h 14 mm.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 42 bar.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 42.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 42 bar. It is supplied exclusively with a fixed setting and a lead seal.