Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 7.00 bar, stainless steel 1.4401

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 7.00 bar. When it responds, up to 189 m³/h escape freely. Body of stainless steel 1.4401, seal of FKM, nominal size DN 8.

Benefits

• Overall height H 63 mm, dimension h 14 mm.
• Set pressure 7.00 bar, fixed and lead-sealed at the factory.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 7 bar.
• Connection thread G 1/2" with 24 mm across flats.
• Discharge capacity 189 m³/h at nominal size DN 8.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/2" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 7 bar. It is supplied exclusively with a fixed setting and a lead seal.