Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 4.50 bar, stainless steel 1.4571

This safety valve limits the pressure in compressed air systems and opens at a factory-set 4.50 bar. Through the DN 8 seat and the G 1/2" connection it discharges up to 129 m³/h. The body is made of stainless steel 1.4571, the seal of FKM.

Benefits

• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 4,5 bar.
• Discharge capacity 129 m³/h at nominal size DN 8.
• Body of stainless steel 1.4571 with an FKM seal for -25 to +180 °C.
• Overall height H 63 mm, dimension h 14 mm.
• Set pressure 4.50 bar, fixed and lead-sealed at the factory.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/2" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

As a type-tested component the valve carries the marking TÜV.SV...-882.8.D/G.0.65 CE0036 4,5 bar and leaves the factory lead-sealed. Later adjustment of the 4.50 bar set pressure is therefore ruled out.