Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 0.30 bar, stainless steel 1.4401

For systems that must not exceed 0.30 bar, this valve is set to exactly that value at the factory and lead-sealed. It blows off freely and carries away up to 14 m³/h. Connection G 1/2", material stainless steel 1.4401, nominal size DN 8.

Benefits

• Discharge capacity 14 m³/h at nominal size DN 8.
• Body of stainless steel 1.4401 with an FKM seal for -25 to +180 °C.
• Overall height H 63 mm, dimension h 14 mm.
• Available with an NPT thread instead of G 1/2" and with a setting certificate on request.
• Set pressure 0.30 bar, fixed and lead-sealed at the factory.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 0.30 bar. The material stainless steel 1.4401 also determines which medium and which surroundings are suitable.

Standards and conformity

The set pressure of 0.30 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.31 CE0036 0,3 bar. The valve is supplied in this fixed setting only.