Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 0.25 bar, stainless steel 1.4401

The set pressure of 0.25 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 13 m³/h and blows off freely. The body is made of stainless steel 1.4401 and the connection thread is G 1/2".

Benefits

• Set pressure 0.25 bar, fixed and lead-sealed at the factory.
• Discharge capacity 13 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.
• Body of stainless steel 1.4401 with an FKM seal for -25 to +180 °C.
• Overall height H 63 mm, dimension h 14 mm.

Applications

For compressed air networks, test equipment and receivers with a limit pressure of 0.25 bar this valve is the matching protection. Up to 13 m³/h are carried away when it responds, while toxic or flammable gases are excluded.

Standards and conformity

The set pressure of 0.25 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.31 CE0036 0,25 bar. The valve is supplied in this fixed setting only.