Safety valve, TÜV type-tested, factory-set and lead-sealed, G 3/8", DN 8, 50.00 bar, brass

Made of brass, this valve safeguards compressed air systems against overpressure and opens at 50.00 bar. The DN 8 seat permits a discharge capacity of 1218 m³/h. Installation is via G 3/8" and the overall height is 82 mm.

Benefits

• Set pressure 50.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 1218 m³/h at nominal size DN 8.
• Connection thread G 3/8" with 20 mm across flats.
• Body of brass with an FKM seal for -25 to +180 °C.
• Overall height H 82 mm, dimension h 12 mm.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 50.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The set pressure of 50.00 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 50 bar. The valve is supplied in this fixed setting only.