Corner safety valve, for compressed air and non-flammable gases, G 3/4", DN 13, 15.5 bar, gunmetal
Every compressed air receiver has to be protected against inadmissible overpressure. This corner safety valve opens at 15.5 bar and blows off 457 m³/h without any control system taking action. The connection is G 3/4" and the nominal size DN 13. A gunmetal body and a seal of FKM allow temperatures of -20 to +200 °C. The height above the connecting face is 70 mm.
Advantages
- Temperature range of -20 to +200 °C, which covers outdoor installation and hot media alike.
- Fixed set pressure of 15.5 bar, so the protection is unambiguous without any adjustment on site.
- Discharge capacity of 457 m³/h of compressed air at DN 13, sufficient for the matching receiver or compressor.
- Connection G 3/4" with nominal size DN 13 and 32 mm across flats, so an ordinary spanner is enough for installation.
- Corner design with 31 mm face-to-centre length and 70 mm overall height, so the valve adds little to a vessel wall.
Technical data
| Feature | Value |
|---|---|
| Version | for compressed air and other non-toxic, non-flammable gases |
| Connection thread | G 3/4" |
| Nominal size DN [mm] | 13 |
| Set pressure [bar] | 15.5 |
| Discharge capacity compressed air [m³/h] | 457 |
| Temperature range [°C] | -20 to +200 |
| Width across flats [mm] | 32 |
| Face-to-centre length L [mm] | 31 |
| Height h [mm] | 18 |
| Overall height H [mm] | 70 |
| Component identification | TÜV-SV...-312.13.D/G.0,28 CE0036 15,5 bar |
| Body material | gunmetal |
| Spring material | spring steel |
| Seal material | FKM |
| Media | compressed air and other non-toxic, non-flammable gases |
| Setting | fixed setting, type tested |
Applications
Stationary compressed air systems with a fixed set pressure of 15.5 bar. Vessels and pipework with female thread G 3/4". Plants with operating temperatures within the range -20 to +200 °C. Replacement of a defective safety valve of the same nominal size DN 13.
Standards and conformity
The valve is type tested and carries the component identification TÜV-SV...-312.13.D/G.0,28 CE0036 15,5 bar. It is supplied with a fixed setting only, so the set pressure of 15.5 bar cannot be altered. A setting certificate to 3.1 is available on request.
| Hersteller-Nr | SVGI 34 13-15,5 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571678517 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperaturbereich | -20-200 °C |
| Ausführung | für Druckluft und andere ungiftige, nicht brennbare Gase |
| Thread | G 3/4 |
| Set pressure [bar] | 15,5 |
