Corner safety valve, for saturated steam and compressed air, G 1", DN 16, 1.2 bar, gunmetal

In steam and compressed air systems the safety valve is the last element of pressure protection and has to work without auxiliary power. This corner valve in G 1" responds at 1.2 bar and is fixed to that setting. Through DN 16 it discharges 89 m³/h of compressed air. The EPDM seal and the gunmetal body permit temperatures of -40 to +150 °C. The width across flats at the hexagon is 40 mm.

Advantages

• Fixed set pressure of 1.2 bar, so the protection is unambiguous without any adjustment on site.
• Discharge capacity of 89 m³/h of compressed air at DN 16, sufficient for the matching receiver or compressor.
• Discharge capacity of 71 kg/h of steam, which also makes the valve usable on steam boilers to TRD group 1.
• Gunmetal body, spring steel spring and a seal of EPDM, matched to steam, compressed air and other non-toxic, non-flammable gases.
• Connection G 1" with nominal size DN 16 and 40 mm across flats, so an ordinary spanner is enough for installation.

Applications

Stationary compressed air systems with a fixed set pressure of 1.2 bar. Vessels and pipework with female thread G 1". Plants with operating temperatures within the range -40 to +150 °C. Replacement of a defective safety valve of the same nominal size DN 16.

Standards and conformity

The valve is type tested and carries the component identification TÜV-SV...-312.16.D/G.0,28 CE0036 1,2 bar. It is supplied with a fixed setting only, so the set pressure of 1.2 bar cannot be altered. A setting certificate to 3.1 is available on request. The version is approved for saturated steam and for steam boilers to TRD group 1.