Safety valve, TÜV type-tested, factory-set and lead-sealed, G 3/8", DN 8, 6.50 bar, brass

The valve responds at 6.50 bar and protects vessels and pipework against inadmissible overpressure. Its discharge capacity is 177 m³/h at nominal size DN 8. It is fitted through the G 3/8" thread and the body is made of brass.

Benefits

• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 6,5 bar.
• Discharge capacity 177 m³/h at nominal size DN 8.
• Body of brass with an FKM seal for -25 to +180 °C.
• Overall height H 63 mm, dimension h 12 mm.
• Set pressure 6.50 bar, fixed and lead-sealed at the factory.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 6.50 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

As a type-tested component the valve carries the marking TÜV.SV...-882.8.D/G.0.65 CE0036 6,5 bar and leaves the factory lead-sealed. Later adjustment of the 6.50 bar set pressure is therefore ruled out.