Safety valve, TÜV type-tested, factory-set and lead-sealed, G 3/8", DN 8, 38.00 bar, brass

Made of brass, this valve safeguards compressed air systems against overpressure and opens at 38.00 bar. The DN 8 seat permits a discharge capacity of 930 m³/h. Installation is via G 3/8" and the overall height is 75 mm.

Benefits

• Set pressure 38.00 bar, fixed and lead-sealed at the factory.
• Body of brass with an FKM seal for -25 to +180 °C.
• Connection thread G 3/8" with 20 mm across flats.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 38 bar.
• Discharge capacity 930 m³/h at nominal size DN 8.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 38.00 bar. The material brass also determines which medium and which surroundings are suitable.

Standards and conformity

The set pressure of 38.00 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 38 bar. The valve is supplied in this fixed setting only.