Safety valve, TÜV type-tested, factory-set and lead-sealed, G 3/8", DN 8, 18.30 bar, brass

The valve responds at 18.30 bar and protects vessels and pipework against inadmissible overpressure. Its discharge capacity is 459 m³/h at nominal size DN 8. It is fitted through the G 3/8" thread and the body is made of brass.

Benefits

• Free blow-off of up to 459 m³/h for compressed air and other non-toxic, non-flammable gases.
• Set pressure 18.30 bar, fixed and lead-sealed at the factory.
• Body of brass with an FKM seal for -25 to +180 °C.
• Connection thread G 3/8" with 20 mm across flats.
• Overall height H 75 mm, dimension h 12 mm.

Applications

On boilers, vessels and manifolds with a G 3/8" connection the valve provides protection at 18.30 bar. An overall height of 75 mm and 20 mm across flats ease installation in tight pipework.

Standards and conformity

The set pressure of 18.30 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 18,3 bar. The valve is supplied in this fixed setting only.