Safety valve, TÜV type-tested, factory-set and lead-sealed, G 3/8", DN 8, 11.60 bar, brass

The set pressure of 11.60 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 299 m³/h and blows off freely. The body is made of brass and the connection thread is G 3/8".

Benefits

• Set pressure 11.60 bar, fixed and lead-sealed at the factory.
• Body of brass with an FKM seal for -25 to +180 °C.
• Connection thread G 3/8" with 20 mm across flats.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 11,6 bar.
• Discharge capacity 299 m³/h at nominal size DN 8.

Applications

The valve is fitted wherever compressed air is stored or distributed and protection at 11.60 bar is required. Its temperature range of -25 to +180 °C covers indoor rooms as well as outdoor installations.

Standards and conformity

As a type-tested component the valve carries the marking TÜV.SV...-882.8.D/G.0.65 CE0036 11,6 bar and leaves the factory lead-sealed. Later adjustment of the 11.60 bar set pressure is therefore ruled out.