Safety valve, type-approved, preset and sealed, G 3/8", DN 10, 1.20 bar, brass

For vessels and lines that must stay below their permissible operating pressure at all times, this valve works with a fixed set pressure of 1.20 bar. The corresponding discharge capacity is 73.4 m³/h. The connection is a G 3/8" thread in DN 10 and the body is made of brass.

Benefits

• Connection thread G 3/8" at nominal size DN 10, installation with 27 mm across flats.
• FKM seal, which covers a temperature range from -25 to +180 °C.
• Overall height 75 mm and screw-in section height 12 mm, so the space required can be determined before installation.
• Body material brass, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 1,2 bar.

Applications

• Retrofitting on existing DN 10 vessel ports.
• Protection of compressed air receivers with a permissible operating pressure of 1.20 bar.
• Compressor stations and compressed air treatment up to an operating pressure of 1.20 bar.
• Supply lines for non-toxic and non-flammable gases.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 1.2 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 1.20 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.