Safety valve, TÜV type-tested, factory-set, G 1/4", DN 8, 8.60 bar, stainless steel 1.4401

The set pressure of 8.60 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 227 m³/h and blows off freely. The body is made of stainless steel 1.4401 and the connection thread is G 1/4".

Benefits

• Discharge capacity 227 m³/h at nominal size DN 8.
• Connection thread G 1/4" with 22 mm across flats.
• Set pressure 8.60 bar, fixed and lead-sealed at the factory.
• Free blow-off of up to 227 m³/h for compressed air and other non-toxic, non-flammable gases.
• Body of stainless steel 1.4401 with an FKM seal for -25 to +180 °C.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 8.60 bar. The material stainless steel 1.4401 also determines which medium and which surroundings are suitable.

Standards and conformity

Type testing is documented by the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 8,6 bar. A setting certificate is available on request, as is an NPT thread.