Safety valve, TÜV type-tested, factory-set, G 1/4", DN 8, 6.00 bar, stainless steel 1.4401

Made of stainless steel 1.4401, this valve safeguards compressed air systems against overpressure and opens at 6.00 bar. The DN 8 seat permits a discharge capacity of 165 m³/h. Installation is via G 1/4" and the overall height is 63 mm.

Benefits

• Connection thread G 1/4" with 22 mm across flats.
• Overall height H 63 mm, dimension h 10 mm.
• Set pressure 6.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 165 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 1/4" and with a setting certificate on request.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/4" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

The set pressure of 6.00 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 6 bar. The valve is supplied in this fixed setting only.