Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/4", DN 8, 3.00 bar, brass

With its G 1/4" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 3.00 bar. When it responds, up to 93 m³/h escape freely. Body of brass, seal of FKM, nominal size DN 8.

Benefits

• Free blow-off of up to 93 m³/h for compressed air and other non-toxic, non-flammable gases.
• Set pressure 3.00 bar, fixed and lead-sealed at the factory.
• Body of brass with an FKM seal for -25 to +180 °C.
• Connection thread G 1/4" with 17 mm across flats.
• Overall height H 55 mm, dimension h 10 mm.

Applications

For compressed air networks, test equipment and receivers with a limit pressure of 3.00 bar this valve is the matching protection. Up to 93 m³/h are carried away when it responds, while toxic or flammable gases are excluded.

Standards and conformity

The valve is type-tested and carries the component marking TÜV-SV...-2055.7,5.D/G.0,75 CE0036 3 bar. It is supplied exclusively with a fixed setting and a lead seal.