Safety valve, TÜV type-tested, factory-set, G 1/4", DN 8, 2.00 bar, stainless steel 1.4401

For systems that must not exceed 2.00 bar, this valve is set to exactly that value at the factory and lead-sealed. It blows off freely and carries away up to 69 m³/h. Connection G 1/4", material stainless steel 1.4401, nominal size DN 8.

Benefits

• Connection thread G 1/4" with 22 mm across flats.
• Overall height H 63 mm, dimension h 10 mm.
• Set pressure 2.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 69 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 1/4" and with a setting certificate on request.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/4" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

The set pressure of 2.00 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.57 CE0036 2 bar. The valve is supplied in this fixed setting only.