Safety valve, TÜV type-tested, factory-set, G 1/4", DN 8, 11.00 bar, stainless steel 1.4571

The valve responds at 11.00 bar and protects vessels and pipework against inadmissible overpressure. Its discharge capacity is 285 m³/h at nominal size DN 8. It is fitted through the G 1/4" thread and the body is made of stainless steel 1.4571.

Benefits

• Connection thread G 1/4" with 22 mm across flats.
• Overall height H 63 mm, dimension h 10 mm.
• Set pressure 11.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 285 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 1/4" and with a setting certificate on request.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/4" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 11 bar. It is supplied exclusively with a fixed setting and a lead seal.