Safety valve, TÜV type-tested, factory-set, G 1/4", DN 8, 1.50 bar, stainless steel 1.4401

This safety valve limits the pressure in compressed air systems and opens at a factory-set 1.50 bar. Through the DN 8 seat and the G 1/4" connection it discharges up to 50 m³/h. The body is made of stainless steel 1.4401, the seal of FKM.

Benefits

• Set pressure 1.50 bar, fixed and lead-sealed at the factory.
• Discharge capacity 50 m³/h at nominal size DN 8.
• Free blow-off of compressed air and further non-toxic, non-flammable gases.
• Available on request with an NPT thread instead of G 1/4" and with a setting certificate.
• Connection thread G 1/4" with 22 mm across flats.

Applications

Typical installation points are compressed air networks, vessels and test rigs with an operating pressure below 1.50 bar. The temperature range of -25 to +180 °C also covers warm sections of pipework.

Standards and conformity

Type-tested version with the marking TÜV.SV...-882.8.D/G.0.57 CE0036 1,5 bar. The set pressure of 1.50 bar is retained, as the valve is only available with a fixed setting.