Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 37.00 bar, stainless steel 1.4571

The set pressure of 37.00 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 907 m³/h and blows off freely. The body is made of stainless steel 1.4571 and the connection thread is G 1/2".

Benefits

• Set pressure 37.00 bar, fixed and lead-sealed at the factory.
• Body of stainless steel 1.4571 with an FKM seal for -25 to +180 °C.
• Connection thread G 1/2" with 24 mm across flats.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 37 bar.
• Discharge capacity 907 m³/h at nominal size DN 8.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 37.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The set pressure of 37.00 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 37 bar. The valve is supplied in this fixed setting only.