Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 33.50 bar, brass

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 33.50 bar. When it responds, up to 823 m³/h escape freely. Body of brass, seal of FKM, nominal size DN 8.

Benefits

• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 33,5 bar.
• Discharge capacity 823 m³/h at nominal size DN 8.
• Body of brass with an FKM seal for -25 to +180 °C.
• Overall height H 75 mm, dimension h 14 mm.
• Set pressure 33.50 bar, fixed and lead-sealed at the factory.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 33.50 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 33,5 bar. It is supplied exclusively with a fixed setting and a lead seal.