Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 3.70 bar, brass

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 3.70 bar. When it responds, up to 110 m³/h escape freely. Body of brass, seal of FKM, nominal size DN 8.

Benefits

• Discharge capacity 110 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.
• Set pressure 3.70 bar, fixed and lead-sealed at the factory.
• Free blow-off of up to 110 m³/h for compressed air and other non-toxic, non-flammable gases.
• Body of brass with an FKM seal for -25 to +180 °C.

Applications

The valve is fitted wherever compressed air is stored or distributed and protection at 3.70 bar is required. Its temperature range of -25 to +180 °C covers indoor rooms as well as outdoor installations.

Standards and conformity

Type testing is documented by the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 3,7 bar. A setting certificate is available on request, as is an NPT thread.