Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 26.00 bar, brass

The set pressure of 26.00 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 643 m³/h and blows off freely. The body is made of brass and the connection thread is G 1/2".

Benefits

• Set pressure 26.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 643 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.
• Body of brass with an FKM seal for -25 to +180 °C.
• Overall height H 75 mm, dimension h 14 mm.

Applications

The valve is used on air receivers, compressors and distribution lines in which the pressure must not exceed 26.00 bar. It also suits systems with other non-toxic and non-flammable gases, as it blows off freely.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 26 bar. It is supplied exclusively with a fixed setting and a lead seal.