Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 24.00 bar, stainless steel 1.4571

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 24.00 bar. When it responds, up to 596 m³/h escape freely. Body of stainless steel 1.4571, seal of FKM, nominal size DN 8.

Benefits

• Body of stainless steel 1.4571 with an FKM seal for -25 to +180 °C.
• Set pressure 24.00 bar, fixed and lead-sealed at the factory.
• Overall height H 75 mm, dimension h 14 mm.
• Discharge capacity 596 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/2" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

Type testing is documented by the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 24 bar. A setting certificate is available on request, as is an NPT thread.