Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 23.00 bar, stainless steel 1.4401

The set pressure of 23.00 bar is fixed and lead-sealed at the factory, so no readjustment is needed in service. At DN 8 the valve carries away up to 572 m³/h and blows off freely. The body is made of stainless steel 1.4401 and the connection thread is G 1/2".

Benefits

• Connection thread G 1/2" with 24 mm across flats.
• Overall height H 75 mm, dimension h 14 mm.
• Set pressure 23.00 bar, fixed and lead-sealed at the factory.
• Discharge capacity 572 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 1/2" and with a setting certificate on request.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 23.00 bar. The material stainless steel 1.4401 also determines which medium and which surroundings are suitable.

Standards and conformity

As a type-tested component the valve carries the marking TÜV.SV...-882.8.D/G.0.65 CE0036 23 bar and leaves the factory lead-sealed. Later adjustment of the 23.00 bar set pressure is therefore ruled out.