Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 18.50 bar, brass

For systems that must not exceed 18.50 bar, this valve is set to exactly that value at the factory and lead-sealed. It blows off freely and carries away up to 464 m³/h. Connection G 1/2", material brass, nominal size DN 8.

Benefits

• Free blow-off of up to 464 m³/h for compressed air and other non-toxic, non-flammable gases.
• Set pressure 18.50 bar, fixed and lead-sealed at the factory.
• Body of brass with an FKM seal for -25 to +180 °C.
• Connection thread G 1/2" with 24 mm across flats.
• Overall height H 75 mm, dimension h 14 mm.

Applications

For compressed air networks, test equipment and receivers with a limit pressure of 18.50 bar this valve is the matching protection. Up to 464 m³/h are carried away when it responds, while toxic or flammable gases are excluded.

Standards and conformity

The set pressure of 18.50 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 18,5 bar. The valve is supplied in this fixed setting only.