Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 16.60 bar, brass

For air receivers, compressors and pipework that must not exceed 16.60 bar, this valve is factory-set and lead-sealed. The discharge capacity is 419 m³/h at DN 8. It is screwed in with G 1/2" and made of brass.

Benefits

• Set pressure 16.60 bar, fixed and lead-sealed at the factory.
• Discharge capacity 419 m³/h at nominal size DN 8.
• Free blow-off of compressed air and further non-toxic, non-flammable gases.
• Available on request with an NPT thread instead of G 1/2" and with a setting certificate.
• Connection thread G 1/2" with 24 mm across flats.

Applications

The valve fits wherever compressed air or comparable non-toxic, non-flammable gases are carried and protection at 16.60 bar is required. The G 1/2" connection allows installation in existing threaded ports.

Standards and conformity

Type-tested version with the marking TÜV.SV...-882.8.D/G.0.65 CE0036 16,6 bar. The set pressure of 16.60 bar is retained, as the valve is only available with a fixed setting.