Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 13.60 bar, brass

For systems that must not exceed 13.60 bar, this valve is set to exactly that value at the factory and lead-sealed. It blows off freely and carries away up to 347 m³/h. Connection G 1/2", material brass, nominal size DN 8.

Benefits

• Connection thread G 1/2" with 24 mm across flats.
• Overall height H 63 mm, dimension h 14 mm.
• Set pressure 13.60 bar, fixed and lead-sealed at the factory.
• Discharge capacity 347 m³/h at nominal size DN 8.
• Available with an NPT thread instead of G 1/2" and with a setting certificate on request.

Applications

For compressed air networks, test equipment and receivers with a limit pressure of 13.60 bar this valve is the matching protection. Up to 347 m³/h are carried away when it responds, while toxic or flammable gases are excluded.

Standards and conformity

The set pressure of 13.60 bar forms part of the type test and is documented in the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 13,6 bar. The valve is supplied in this fixed setting only.