Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 11.00 bar, stainless steel 1.4401

Made of stainless steel 1.4401, this valve safeguards compressed air systems against overpressure and opens at 11.00 bar. The DN 8 seat permits a discharge capacity of 285 m³/h. Installation is via G 1/2" and the overall height is 63 mm.

Benefits

• Discharge capacity 285 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.
• Set pressure 11.00 bar, fixed and lead-sealed at the factory.
• Free blow-off of up to 285 m³/h for compressed air and other non-toxic, non-flammable gases.
• Body of stainless steel 1.4401 with an FKM seal for -25 to +180 °C.

Applications

Typical installation points are pressure vessels, compressor stations and pipe runs with a G 1/2" connection. Because the valve blows off freely, it is intended for compressed air and further non-toxic, non-flammable gases.

Standards and conformity

Type testing is documented by the component marking TÜV.SV...-882.8.D/G.0.65 CE0036 11 bar. A setting certificate is available on request, as is an NPT thread.