Safety valve, TÜV type-tested, factory-set, G 1/2", DN 8, 0.80 bar, stainless steel 1.4571

With its G 1/2" connection the safety valve suits receivers, compressors and manifolds whose pressure has to stay below 0.80 bar. When it responds, up to 19 m³/h escape freely. Body of stainless steel 1.4571, seal of FKM, nominal size DN 8.

Benefits

• Set pressure 0.80 bar, fixed and lead-sealed at the factory.
• Connection thread G 1/2" with 24 mm across flats.
• Free blow-off of up to 19 m³/h for compressed air and other non-toxic, non-flammable gases.
• Overall height H 63 mm, dimension h 14 mm.
• Type-tested and carrying the component marking TÜV.SV...-882.8.D/G.0.31 CE0036 0,8 bar.

Applications

On boilers, vessels and manifolds with a G 1/2" connection the valve provides protection at 0.80 bar. An overall height of 63 mm and 24 mm across flats ease installation in tight pipework.

Standards and conformity

As a type-tested component the valve carries the marking TÜV.SV...-882.8.D/G.0.31 CE0036 0,8 bar and leaves the factory lead-sealed. Later adjustment of the 0.80 bar set pressure is therefore ruled out.