Safety valve, TÜV type-tested, factory-set and lead-sealed, G 1/2", DN 8, 0.25 bar, brass

For systems that must not exceed 0.25 bar, this valve is set to exactly that value at the factory and lead-sealed. It blows off freely and carries away up to 13 m³/h. Connection G 1/2", material brass, nominal size DN 8.

Benefits

• Body of brass with an FKM seal for -25 to +180 °C.
• Set pressure 0.25 bar, fixed and lead-sealed at the factory.
• Overall height H 63 mm, dimension h 14 mm.
• Discharge capacity 13 m³/h at nominal size DN 8.
• Connection thread G 1/2" with 24 mm across flats.

Applications

In workshops, machines and test rigs the valve protects lines whose working pressure stays below 0.25 bar. The material brass also determines which medium and which surroundings are suitable.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.8.D/G.0.31 CE0036 0,25 bar. It is supplied exclusively with a fixed setting and a lead seal.