Safety valve, preset and lead-sealed, G 1/2", DN 10, 10.00 bar, stainless steel 1.4401

Wherever a compressed air receiver or a pipe has to be protected against overpressure, this spring-loaded valve does the job without auxiliary power. It responds at 10.00 bar and discharges up to 444.9 m³/h. The connection is the G 1/2" thread in nominal size DN 10, and the body is made of stainless steel 1.4401.

Benefits

• Type-approved and marked with the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 10 bar.
• The set value of 10.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 444.9 m³/h, referred to the set pressure of 10.00 bar.
• Screwed in through G 1/2" in DN 10 and tightened at the 27 mm wrench flat.
• Valve body in stainless steel 1.4401, matching compressed air and non-toxic, non-flammable gases.

Applications

• Test benches and machines where the set pressure of 10.00 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 10.00 bar.
• Protection of pipes and fittings in compressed air networks with a G 1/2" connection.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 10 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 10.00 bar. An NPT thread and a setting certificate are available as options.