Safety valve, preset and lead-sealed, G 1/2", DN 10, 16.00 bar, nickel-plated brass

The safety valve limits the pressure in compressed air systems and opens automatically as soon as 16.00 bar is reached. In that case up to 690 m³/h are discharged freely until the system pressure falls below the set value again. The valve body is made of nickel-plated brass and is screwed in through the G 1/2" thread in nominal size DN 10.

Benefits

• Valve body in nickel-plated brass, matching compressed air and non-toxic, non-flammable gases.
• Set pressure adjusted to 16.00 bar and sealed at the factory, no readjustment on site is required.
• Tested discharge capacity of 690 m³/h, which allows the protection to be verified by calculation.
• G 1/2" connection thread in nominal size DN 10, fitted with a 27 mm spanner size.
• The FKM sealing material allows operating temperatures from -25 to +180 °C.

Applications

• Installation in systems with operating temperatures between -25 and +180 °C.
• Test benches and machines where the set pressure of 16.00 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 16.00 bar.

Standards and conformity

The delivery is based on the type approval, documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 16 bar with the notified body CE0036. The set pressure of 16.00 bar is adjusted and sealed at the factory, adjustment on site is not intended. Fixed settings between 0.2 and 50 bar are possible. On request the valve comes with an NPT thread and with a setting certificate.