Corner safety valve, for saturated steam and compressed air, G 1/2", DN 10, 2.6 bar, gunmetal

A steam boiler must not exceed its permissible working pressure, not even when the control system fails. This corner safety valve opens at a fixed set pressure of 2.6 bar and releases the excess pressure to atmosphere. The connection is G 1/2" with a nominal size of DN 10. The discharge capacity is 58 m³/h of compressed air. A gunmetal body, a spring steel spring and a seal of EPDM cover the temperature range of -40 to +150 °C.

Advantages

• Fixed set pressure of 2.6 bar, so the protection is unambiguous without any adjustment on site.
• Discharge capacity of 58 m³/h of compressed air at DN 10, sufficient for the matching receiver or compressor.
• Discharge capacity of 45 kg/h of steam, which also makes the valve usable on steam boilers to TRD group 1.
• Gunmetal body, spring steel spring and a seal of EPDM, matched to steam, compressed air and other non-toxic, non-flammable gases.
• Connection G 1/2" with nominal size DN 10 and 27 mm across flats, so an ordinary spanner is enough for installation.

Applications

Steam boilers to TRD group 1 with a permissible pressure of 2.6 bar. Heat exchangers and steam manifolds with connection G 1/2". Vessels operated within the temperature range -40 to +150 °C. Plants where the component identification has to be presented for acceptance.

Standards and conformity

The valve is type tested and carries the component identification TÜV-SV...-312.10.D/G.0,28 CE0036 2,6 bar. It is supplied with a fixed setting only, so the set pressure of 2.6 bar cannot be altered. A setting certificate to 3.1 is available on request. The version is approved for saturated steam and for steam boilers to TRD group 1.