Air service unit, G 3/8", 0.5-16 bar, metal bowl, L 236 mm, 3-part

In use, the air service unit filters the compressed air, regulates it to the set pressure and adds oil. It is produced from zinc die casting Z410 with NBR diaphragm and seals. The data give a face-to-face length of 236 mm and an overall height of 201.0 mm. In addition the data give the G 3/8" port, a pore size of 5 µm, the metal bowl and L 236 mm.

Benefits

• Filter, relieving regulator and lubricator on the G 3/8" port.
• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate 50 - 1400 l/min at a filter pore size of 5 µm.
• Oil reservoir 110 cm³ and condensate volume up to 50 cm³.
• Lubricator response limit at 6 bar 50 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Applications

On presses and handling equipment the regulator keeps the pressure steady within 0.5 - 16 bar.