Air service unit, G 1", 0.5-16 bar, metal bowl, 3-part, semi-automatic drain

Once installed, the air service unit filters the compressed air, regulates it to the set pressure and adds oil. The article is listed with a pressure control range of 0.5 - 16 bar. Material zinc die casting Z410 with NBR diaphragm and seals is listed for this version. Also stated are the G 1" port, a pore size of 5 µm and the metal bowl.

Benefits

• Filter, relieving regulator and lubricator on the G 1" port.
• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate 50 - 3200 l/min at a filter pore size of 5 µm.
• Oil reservoir 135 cm³ and condensate volume up to 65 cm³.
• Lubricator response limit at 6 bar 50 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Applications

On presses and handling equipment the regulator keeps the pressure steady within 0.5 - 16 bar.