Air service unit, G 1-1/2", 0.5-10 bar, 3-part, semi-automatic drain

Once installed, the air service unit filters the compressed air, regulates it to the set pressure and adds oil. The article is listed with a pressure control range of 0.5 - 10 bar. Material zinc die casting Z410 with NBR diaphragm and seals is listed for this version. Also stated are the G 1-1/2" port and a pore size of 40 µm.

Benefits

• Filter, relieving regulator and lubricator on the G 1-1/2" port.
• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate 170 - 4900 l/min at a filter pore size of 40 µm.
• Oil reservoir 550 cm³ and condensate volume up to 300 cm³.
• Lubricator response limit at 6 bar 170 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Applications

On presses and handling equipment the regulator keeps the pressure steady within 0.5 - 10 bar.