Filter regulator, G 3/8", 0.5 - 10 bar, 1500 l/min, plastic, drain automatic

Once installed, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. In addition the sheet lists a flow rate of 1500 l/min. This version comes with port thread G 3/8", overall height 270 mm, dimension H1 118 mm, dimension L 70 mm and flow rate 1500 l/min. The version is listed with a plastic bowl and condensate drain automatic.

Benefits

• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate of 1500 l/min through the port thread G 3/8".
• Sintered filter with a pore size of 40 µm and an additional centrifugal pre-separation stage.
• Condensate drain automatic in the plastic bowl for a condensate volume of up to 50 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 16 bar.

Technical data

Applications

In production with a high condensate load the version plastic bowl works with the condensate drain automatic.

Standards and conformity

Without an ignition source of its own in line with Directive 2014/34/EU, inlet pressure 1.5 - 16 bar.